 MultiPost-Universal SupportsThe supports can be used to fix horizontal anchorage devices - e.g. securely to them and hence to a variety of structures.
The MultiPost has been tested and approved in accordance with EN 795 Classes C & D.
 Type 1 MULTIPOST-UNIVERSAL SUPPORT TYPE 1Fixing on reinforced concrete tested to EN 795, permitted load 15 KN.
For fixing horizontal anchorage devices. Support height 250, 350 or 450 mm.  Type 2 MULTIPOST-UNIVERSAL SUPPORT TYPE 2Fixing on steel girders tested to EN 795, permitted load up to 15 KN.
For fixing horizontal anchorage devices. For girder width b: 80 - 175 mm, max clamping height h: 930 mm. Complete with fixing accessories. Please state clamping height h when ordering.  Type 3 MULTIPOST-UNIVERSAL SUPPORT TYPE 3Fixing on wooden beams tested to EN 795, permitted load up to 15 KN.
For fixing horizontal anchorage devices. For beam width b: 80 - 150 mm, max thickness of roof boards d: 32 mm. Complete with fixing accessories. Please state beam width b when ordering.  MP-Ring MULTIPOST-ANCHORAGE RINGTested only together with the MultiPost according to EN 795 (Class C). Tensile strength = 22.5KN, max tolerable load = 15kN, thread M 12. Supplied with the required washers. Stainless steel. When using MultiPost as end fixing point for Xenon, than this anchorage ring must be used. To be used with MultiPost with or without thermal insulation.
| | |
