Söll – the expert in applied manufacturing,
providing you with the right permanent solution while on the job at height

Gallery Icon
Zurück zur Startseite
Zurück zur Startseite
Söll Tripod & WinchSöll REVACSöll
Soll – the leading manufacturer of fixed safety ladders> Fall Protection Systems> Retractable Fall Arresters & Load Arresters> Retractable Fall Arresters
Load barrier-free versionUnderline all linksPrint versionSend recommendation
Selfretractable Lifeline

A retractable type fall arrester is a fall arrester with a self locking device and an integrated shock absorber.


It is a part of the personal protective equipment against falls from height and can be used at all work places where there is a risk of falling.
Retractable type fall arresters are especially advantageous, since a user has freedom of movement while working owing to a permanently active automatic locking device.
This arresting function, initiated irrespective of the user, always ensures minimal fall distance. As a result, fall arrest forces exerted on the human body are very low.
The automatic initiation of the retractable type fall arrester is activated on an increase in the pulling velocity (greater than 1 m/s). A built-in spring maintains the defined pre-tension in the coupling element (steel rope or webbing) between the user and the device permanently, so that the fall arrester is immediately activated in the event of a fall.

Block with Webbing
Webbing Blocks

RETRACTABLE TYPE FALL ARRESTER WITH WEBBING

Tested in compliance with EN 360. Built-in shock absorption elements restrict the fall arrest force to below 6 KN. Two or, depending on the device type, three continuously moving and mutually independent latches prevent seizing due to ice formation, dirt, etc. The galvanized steel housing guarantees 100 % functional capability even under the severest of conditions. Since the formation of static charges is impossible, it is suitable for applications in Explosive-protection areas, e.g. mines, chemical industries, etc. Braking distance is less than 0.5 m under normal operating conditions.

Devices with webbing are slightly lighter and suitable for surroundings that are not very dirty.
Webbing length - weight: 5 m - 4.6 kg / 12 m - 7.3 kg

Available in our Onlineshop.

Block with Steel Wire
Steel Wire Blocks

RETRACTABLE TYPE FALL ARRESTER WITH STEEL WIRE

Tested in compliance with EN 360. Built-in shock absorption elements restrict the fall arrest force to below 6 KN. Two or, depending on the device type, three continuously moving and mutually independent latches prevent seizing due to ice formation, dirt, etc. The galvanized steel housing guarantees 100 % functional capability even under the severest of conditions. Since the formation of static charges is impossible, it is suitable for applications in Explosive-protection areas, e.g. mines, chemical industries, etc. Braking distance is less than 0.5 m under normal operating conditions.
Devices with steel ropes are especially suitable for severe ambient conditions. Stainless steel ropes on request.

Steel rope length - weight: 5 m - 5 kg / 10 m - 10.2 kg / 16 m - 11 kg / 22 m - 17.8 kg / 30 m - 18.4 kg

Available in our Onlineshop.

Load barrier-free versionUnderline all linksPrint versionSend recommendation