TOWERHARNESS

The new SOLL - tower harness has been designed especially for the use in the telecom sector. It provides high functionality and comfort. The new snap locks enable to put the harness rapidly on. The SOLL - tower harness is particularly suitable for working in a sitting position and for work positioning purposes using the D-ring at the waist or chest level. The shoulder, back and buttock webbings are padded. A central anchorage at chest level enables to work in an almost sitting position thanks to the special geometry of the harness. The loads are well distributed between back, shoulders and buttock. Two lateral, adjustable work positioning D-rings enable to anchor safety and work positioning lanyards. By adjusting the work positioning D-rings the respective load of buttock and back when using the work positioning function can be individually set. Furthermore, the Soll - tower harness can be used in conjunction with fall protection devices (guided type fall arresters on rigid anchor line) in accordance with EN 353-1.

Available in our Onlineshop.

MILLER REVOLUTION

A quantum leap in design, innovation and 21st century safety technology.
Based on key, user-identified needs, Miller developed a new range of fall protection harnesses that meet and/or exceed expectations of users well versed in the delicate balance of safety and functionality while working at height.
Engineered with 8 Unique Components:

• Cam Buckle
• Web Finials
• Self-Contained Label Pack
• Integrated Accessory System
• Custom Identification
• ErgoArmor™ Back Shield
• PivotLink™ Connection
• Available Webbing Options: DualTech™ or DuraFlex™

Sold through local Sperian distributors.

MILLER ATEX

Anti static harness with dorsal extension strap and mobile pad. Rear & front anchorage points. Automatic buckles. 1.4 kg. Temperature: -30°C à +50°C. This Miller Harness is the perfect solution for work at height in explosive atmospheres. It is particularly suitable for petrochemical and mining environments.
S/M: 1015074
M/L: 1015075
EN 361, Directive ATEX 94/9/CE - EN 13463-1 (2001) - EN 13463-5 (2005)

Together with Falcon 1015191, this full body harness has been approved for Xenon Overhead systems zone 2 explosive-protection areas.

SoGu 1

The new SÖLL - tower harness has been designed especially for the use in the telecom sector. It provides high functionality and comfort. The new snap locks enable to put the harness rapidly on. The SÖLL - tower harness is particularly suitable for working in a sitting position and for work positioning purposes using the D-ring at the waist or chest level. The shoulder, back and buttock webbings are padded. A central anchorage at chest level enables to work in an almost sitting position thanks to the special geometry of the harness. The loads are well distributed between back, shoulders and buttock. Two lateral, adjustable work positioning D-rings enable to anchor safety and work positioning lanyards. By adjusting the work positioning D-rings the respective load of buttock and back when using the work positioning function can be individually set. Furthermore, the Söll - tower harness can be used in conjunction with fall protection devices (guided type fall arresters on rigid anchor line) in accordance with DIN EN 353-1.

Available in our Onlineshop.

SoGu 2

An up-market harness with a back D-ring in shoulder region, two lateral adjustable positioning D-rings and ergonomically shaped back padding. By adjusting the lateral positioning D-rings the respective load when using the positioning function can be set individually to the user's wishes. This means that even when working longer periods in the harness, no signs of fatigue occur. The SöGu 1 can also be used in conjunction with guided type fall arresters (sliding type fall arresters on a rigid anchorage line) in accordance with EN 353-1. The full body harness can also be delivered with additional shoulder padding.

Available in our Onlineshop.

SoGu 3

Thanks to its frontal arrest, descending and rescue D-ring, this harness is particularly suited for persons having to carry equipment on their back, as well as for work that has to be performed in the direction of the anchorage point. This harness is not to be used for sliding type fall arresters on a rigid anchorage line (EN 353/1).

Available in our Onlineshop.

TelGu

Extra wide and padded lower back support which offers high user comfort. In the event of a fall, the user maintains an almost vertical position and the loads on the webbing are well distributed between buttocks and back, thus reducing the risk of injury.

Available in our Onlineshop.

AGU 300 ES

Top of the range, multipurpose harness. Padded shoulder, thigh and back straps ensure greater comfort, and reduced fatigue and wear and tear. Ideal for work positioning, suspension, climbing and rescue. The AGU 300 ES can also be used in conjunction with guided type fall arresters (sliding type fall arresters on a rigid anchorage line) in accordance with EN 353-1.

Available in our Onlineshop.

RM-HARNESS

Lightweight, comfort harness. 3 quick-lock buckles for easy donning. Work in suspension is made more comfortable with a design that applies the load on the thighs and not along the entire harness. Elasticated webbing for greater comfort.

RESCUE-HARNESS

Comfortable, heavy-duty harness specifically designed for work on towers. A wide comfortable support belt to prevent back injuries. Ideal for work positioning and suspension work.