 Fall protection for the highest safety requirementsA safe climbing system must meet stringent safety standards and be resistant to wear and tear. Unlike rope systems, Soll's GlideLoc guide rails allow a combination of vertical and horizontal access without having to disconnect and reconnect.
Also, our rail systems permit safe roof and platform access; whereas rope based systems often end at the last rung leading to stresses being concentrated on the top fixing point. VERTICAL GLIDELOC GUIDE RAILSThe EN 353 compliant Soll guide rails can be assembled on existing ladders, step irons etc. An ascent route protected in this way offers the same protection as Soll's safe climbing systems.
Depending on the requirements, rails can be provided in aluminium, galvanized or stainless steel. HO-VER TURN TABLEProvides safe transfer from the end of a vertical guide rail to the end of a horizontal rail and vice versa without the user needing to disconnect. As an alternative, the turntable enables transfer in all directions. CLAMPSFor fixing onto the centre rungs of existing ladders, or climbing irons. Comes with all required components. Support structure must
be checked for sufficient strength.
BRACKETSOne of our strengths, apart from a wide range of standard brackets, is customisation at a short notice. ACCESSORIESVarious accessories like coupling pieces or identification plates make GlideLoc systems complete.
We would be happy to assist you with planning an ascent route. | | |
